5G Solution /Various shield box

    

Shield box for 5G device evaluation(FA-1901)

A chamber (large shield box) that can accommodate 5G base stations. By combining with our antenna coupler, so it is realized in a compact size.

In addition to base station tests, it is possible to perform quality tests between actual base stations and terminals by combining with a shield box for terminals.

The warning will be displayed when waves inside of the box are emitted by combing with the FPS-290 wave warning device which is used in a shield box for 28GHz band to prevent inadvertent exposure due to forget to close the lid carelessly.

This product can be customized according to the size of the base station to be accommodated.

Specifications

Representative box size 1500(H) x 1100(W) x 800(D) mm
(excluding protrusions)
Shield attenuation 60dB or more (600MHz to 45GHz)
Standard connector SMA or 2.92mm 16 in total
Other Equipped with through-holes for cable entry
Equipped with 4 cooling fans

※Custom available. Please consult our sales department

Multipurpose medium shield box(WM1019-04227)

It is a multipurpose medium size shield box with internal effective dimensions of 500 mm (W) x 500 mm (H) x 500 mm (D). It can be used to measure wireless communication terminals such as mobile terminals as well as various modules and repeaters.
It is equipped with a variety of interfaces inside the box, and in addition to the RF connector (2.92mm, SMA), DSUB9Pin, USB, LAN, and AC, it also has VGA and supports measurement of various devices. It is also equipped with a penetrating tube, so it is possible to directly pull in cables such as optical cables and high-speed USB.
The standard model has a frequency of 800MHz to 43.5GH and a shield attenuation of 60dB or more.

Specifications

External dimensions 600(H) x 600(W) x 600(D)
(excluding protrusions)
Internal effective dimension 500(H) x 500(W) x 500(D)
Internal table dimensions 400mm x 400mm
Penetration tube size Φ50mm x1
Shield attenuation 60dB or more (800MHz to 43.5GHz)
Standard connector SMA or 2.92 connector x10
2.92mm x9
USB3.0 x2 / USB2.0 x2 / DSUB9Pin x3
LAN x1 / VGA x1 / AC100V x1

※Custom available. Please consult our sales department

Shield box for evaluation of various small devices (WM1019-04219)

A compact shield box that enables testing of various terminal devices in a compact size has a flat resin table structure inside, and a single device can measure the radio wave environment of various devices such as mobile phones, game consoles and tablets. It can be realized.
The frequency is 800 MHz to 100GHz, and the amount of attenuation is 60dB or more .
Equipped with abundant interfaces inside the box, equipped with RF connector (2.92mm, SMA), USB, AC, CITA, and also equipped with a through tube, which pulls in multicore cables such as emulators of internal equipment. It is very useful in equipment development and verification.
Equipped with a small fan, internal airflow measures are taken into consideration.

Specifications

External dimensions 250mm(H) x 410mm(W) x 592.5mm(D)
(excluding protrusions)
Internal effective dimension 150(H) x 300(W) x 300(D)
Penetration tube size Φ20mm x1
Shield attenuation 60dB or more (800MHz to 43.5GHz)
Standard connector SMA or 2.92 x8 (Group1)
SMA or 2.92 x4 (Group2)
USB x2 / CITA x2 / AC100V x1

※Custom available. Please consult our sales department

Hand-in-shield box for small device evaluation(WM1019-04207H)

The arm insertion part is a cloth-like metal with a soft shield property. It is not a hard cylinder like the image.

A small shield box that enables testing of various terminal devices in a compact size and has a flat resin table structure inside, and supports various devices such as mobile phones, game consoles and tablets. It is possible to insert the arm and operate the equipment inside the box while securing the shield amount. It is equipped with a window so that you can grasp the situation inside the box. The frequency is 800MHz to 43.5GHz, and the amount of attenuation is 60dB or more.

Equipped with abundant interfaces inside the box, equipped with RF connector (2.92mm, SMA), USB, AC, CITA, and also equipped with a through tube, which pulls in multicore cables such as emulators of internal equipment. It is very useful in equipment development and verification.

Equipped with a small fan, internal airflow measures are taken into consideration.

Specifications

External dimensions 341mm(H) x 505mm(W) x 584.5mm(D)
(excluding protrusions)
Internal effective dimension 200mm(H) x 400mm(W) x 400mm(D)
Penetration tube size Φ20mm x1
Shield attenuation 60dB or more (800MHz to 43.5GHz)
Standard connector SMA or 2.92 x8 (Group1)
SMA or 2.92 x4 (Group2)
USB x2 / LAN x1 / CITA x2 / AC100V x1

※Custom available. Please consult our sales department

Shield box for 5G device evaluation(FS-1905)

This is a second-generation compact shield box that enables testing of 5G terminal equipment in a compact size. The box was downsized to the limit size by our small antenna coupler.
Various tests such as power, spurious, EVM, protocol, MIMO, beamforming, and handover can be supported. Supports frequencies from 24GHz to 43.5GHz. By combining with sub 6 GHz antenna coupler, it can cover 600MHz ~ 43.5GHz. The attenuation of the shield box has secured 60dB or more.

* The shield box size can be customized according to the size of the object to be measured.

Nine millimeter-wave antenna couplers (FA-529S, FA-543S) are installed as standard, and 0 degrees (horizontal), 45 degrees, 90 degrees while maintaining a certain distance in the zenith direction on both the left and right sides and the back of the mobile terminal. Is arranged with degrees. Easy switching between horizontal and vertical polarization Equipped with a mechanism that rotates at right angles.

Optional sub 6 GHz antenna couplers (FA-600, FA-600N) can be mounted on the mobile phone’s diagonal back and liquid crystal surfaces.

Specifications
规格

Box size 226(H) x 350(W) x 395(D)
(excluding protrusions)
Assumed measurement size 160(H) x 80(W)mm
Shield attenuation 60dB or more (600MHz to 45GHz)
Standard connector SMA x2
2.92mm x9
USB3.0 x2
One USB can be replaced with Ethernet

※Custom available. Please consult our sales department