The most suitable ONE custom made from zero.

Custom made switch box controlled by the switching by USB or LAN is available. And the low frequency active magnetic field sensor that can realize the measurement of low frequency from 10Hz, the optical magnetic field sensor by using the method of magneto-optical crystal and the optical probe are also in the strong product lineup.

Interface box

Combine RF switch with high frequency device to design and manufacture various interface boxes.

High frequency signal switch box

• One to four high frequency signal switch boxes.
• Can be controlled by GPIB or USB, switched in a remote way or a local way.
• The selected port is marked by LED.
• The set of high gain amplifier, device power supply and RF cable are lineup (sold separately)
• Can provide multi ports switch box such as 1 to 6, 1 to 10 and so on by using the high frequency switches.
• The frequency band depends on the characteristics of the high frequency switch, the switching box up to 20GHz can be manufactured.

High frequency signal switch box (6×4 FULL MATRIX)

• A switch box that can combinate 6×4 input＆output ports with MATRIX.
• Can be controlled by GPIB or USB.
• port combination is marked by LED.
• FULL MATRIX with 6×4 or 6×6 layout.
• The frequency band depends on the characteristics of the high frequency switch, the switching box up to 20GHz can be manufactured.

Down Converter

• A down converter incorporating RF AMP.
• Up converter is also designed and manufactured.

1×4 Optical Switch Box

• The route can be chosen freely by using the switches on the front panel.
• The switch box controlled by PC via LAN or USB also can be manufactured.

Portable High Frequency Signal Switch Box

• A 1 to 20 high frequency signal switch box.
• It can keep working about 2 hours in where power supply is not available outdoor due to a built-in battery.
• It can be controlled be PC connected by USB interface.
• The compact design for portable

High Frequency Filter

• We design and manufacture various custom-made high frequency filters such as high pass filter, low pass filter, band rejection filter and so on.
• The switch box incorporating filter also can be designed and manufactured.

Inspection Jigs

In order to fix the target items and prevent it from being touched, We developed the jigs uniquely to realize the test automation easily.

Jigs for mobile phone terminals inspection

• Based on the image of the movements of marionette, jigs can make multiple actions with one operation.
• Insert and remove various connectors with one action
• The inspection will be completed in a short time.

Various needle jigs

• We design and manufacture needle jigs for various circuit board inspection.
• We design and manufacture needle jigs equipped with RF probe.
• The needle jigs also can be equipped on an electric circuit board.
• The needle jigs also can be installed inside the shield box.

Various Cables

We manufacture cables of different lengths that with SMA connectors, 3.5 mm (K) connectors, N connectors, etc. We also offer semi-flexible cables and semi-rigid cables that can reduce PIM (Passive Intermodulation)